Product name: Double Flute Down Cut End Mil
Product material: Tungsten steel alloy
Tips: Prices fluctuate with raw materials and exchange rates, leave your contact information, the first time to give you a latest quotation.
Product Designer
| SHK | CED | CEL | OVL | |
| krxcncs2-8-1 | 3.175 | 1 | 3 | 38.5 |
| krxcncs2-8-2 | 3.175 | 1.5 | 7 | 38.5 |
| krxcncs2-8-3 | 3.175 | 2 | 8 | 38.5 |
| krxcncs2-8-4 | 3.175 | 2 | 12 | 38.5 |
| krxcncs2-8-5 | 3.175 | 2.5 | 8 | 38.5 |
| krxcncs2-8-6 | 3.175 | 2.5 | 12 | 38.5 |
| krxcncs2-8-7 | 3.175 | 2.5 | 15 | 38.5 |
| krxcncs2-8-8 | 3.175 | 3.175 | 12 | 38.5 |
| krxcncs2-8-9 | 3.175 | 3.175 | 15 | 38.5 |
| krxcncs2-8-10 | 3.175 | 3.175 | 17 | 38.5 |
| krxcncs2-8-11 | 3.175 | 3.175 | 22 | 45 |
| krxcncs2-8-12 | 4 | 4 | 12 | 45 |
| krxcncs2-8-13 | 4 | 4 | 15 | 45 |
| krxcncs2-8-14 | 4 | 4 | 17 | 45 |
| krxcncs2-8-15 | 4 | 4 | 22 | 45 |
| krxcncs2-8-16 | 4 | 4 | 25 | 50 |
| krxcncs2-8-17 | 4 | 4 | 28 | 55 |
| krxcncs2-8-18 | 4 | 4 | 32 | 60 |
| krxcncs2-8-19 | 6 | 6 | 17 | 50 |
| krxcncs2-8-20 | 6 | 6 | 22 | 50 |
| krxcncs2-8-21 | 6 | 6 | 25 | 50 |
| krxcncs2-8-22 | 6 | 6 | 28 | 60 |
| krxcncs2-8-23 | 6 | 6 | 32 | 60 |
| krxcncs2-8-24 | 8 | 8 | 25 | 60 |
| krxcncs2-8-25 | 8 | 8 | 32 | 65 |
| krxcncs2-8-26 | 8 | 8 | 35 | 75 |
| krxcncs2-8-27 | 8 | 8 | 42 | 75 |
| krxcncs2-8-28 | 8 | 8 | 45 | 90 |
| krxcncs2-8-29 | 10 | 10 | 35 | 80 |
| krxcncs2-8-30 | 10 | 10 | 45 | 100 |
| krxcncs2-8-31 | 10 | 10 | 55 | 100 |
| krxcncs2-8-32 | 12 | 12 | 45 | 100 |
| krxcncs2-8-33 | 12 | 12 | 55 | 100 |
Product application:
Cutting MDF, Multilayer board, Plywood, Acrylic, Density board. etc.
Product advantages:
1, Mirror grinding process, smooth section.
2, High wear resistance, smooth chip removal.
3, Round shank chamfer design, tough and non-slipping.
4, Surface cutting is smooth and tidy, which improves working efficiency.
5, One plastic pipe packs one piece, 10 pieces per group.
